Nano Molecular Coating & Enhancer
SHIELD Nano Molecular Coating & Enhancer has been engineered by NCL’s world class chemists specializing in surface care and surface protection. SHIELD uses advanced nano molecular materials and proprietary ingredients to produce a high gloss invisible protective coating. SHIELD is used on granite, ceramic, porcelain and other hard surfaces to improve the slip resistance, prevent staining, removes scratches, enhance color, increase gloss and protect the surface.Code: 2528Packaging: 4 x 1 Gal./Case
- pH (Concentrate)2.5 ± 0.5
- Specific Gravity (g/cc)1.08 ± 0.01
- Freeze-Thaw StableYes
- Flash PointNone
- Shelf Life1 year minimum in original unopened container
DocumentationTechnical Data Sheet Shield TDS English GHS Safety Data Sheet SHIELD SDS English.pdf Product Flyers, Brochures, and Equipment Manuals SHIELD Brochure
Remove any sealers or coatings from the floor. For best results use a weighted 175 rpm floor machine (a total weight of 140 Ibs. works best).
First, vigorously shake SHIELD bottle to thoroughly blend product for even consistency. Product contains semi-solid polishing agents in liquid that will immediately disperse upon application. Pour a small circle (4” Diameter) of SHIELD Nano Molecular Coating & Enhancer onto the surface. Then place the machine with an NCL AQUA MAGIC™ Polishing Pad onto the product and begin to polish in a slow side-to-side motion. Buff an area of approx. 9 Square Feet (1 Square Meter) until the product has dried. Repeat this process (adding product) until desired gloss has been achieved. Rinse the floor using clean water and vacuum up all residues.
NOTE FOR CERAMIC & PORCELAIN TILE: Follow steps shown above; make sure to provide sufficient buffing to assure that surface is dry and polished before allowing foot traffic.
Features & Benefits
- Polishes Granite, Porcelain & Ceramic Tile to a high gloss
- Creates a protective layer
- Improves slip resistance
- Removes scratches
- Prevents staining
- Enhances color
KEEP OUT OF THE REACH OF CHILDREN
Prevention: Observe good industrial hygiene practices.
Response: Wash thoroughly after handling.
Storage: Store away from incompatible materials.
Disposal: Dispose of contents/container in accordance with local authority requirements.
This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.