Stone Cleaner / Conditioner
PATINA™ is an all natural, biodegradable, highly concentrated cleaner/conditioner designed for daily cleaning and conditioning of all natural stone surfaces. PATINA™ is safe and easy to use on marble, granite, limestone, travertine, terrazzo, agglomerate, slate, unglazed ceramic, porcelain, terra cotta, Saltillo and concrete. Regular use provides a dirt repellent barrier at the surface, prevents hard water damage, brings out the natural color and brilliance of the stone, and improves slip resistance on polished surfaces.
Authorized UL ProductCode: 2504Packaging: 4 x 1 Gal./Case
- Product typeWater-based Cleaner / Coating
- AppearanceAmber liquid
- Specific Gravity (g/cc)1.01 ± 0.02
- pH9.5 ± 0.4
- Solubility in waterComplete
- Flash PointNone
- Viscosity (cps)2500 ± 500
- Safe on StoneYes
- Formation of dirt repellent barrierExcellent
DocumentationTechnical Data Sheet Patina TDS English GHS.pdf Safety Data Sheet PATINA SDS English.pdf
FOR DAMP MOPPING: Dilute PATINA™ at a dilution rate of 1 oz. per gallon with clean water for light soil, 2-3 ounces per gallon for moderate to heavy soil. Soak and wring mop and apply solution to the stone surface. Do not rinse or re-mop. Re-wet and wring mop often to avoid re-depositing dirt to the surface. Change the solution when it appears dirty. Best results will be achieved when buffed on polished surfaces. Using white polishing pad with any speed equipment, always buff after initial application of PATINA™, then buff floor after every 4th application, depending upon traffic and surface appearance.
NOTE: Best results are achieved when cotton mops are not used. Rayon blend mops are recommended.
FOR AUTOMATIC SCRUBBERS: Dilute PATINA™ at the rate of 1 ounce per gallon. Adjust flow rate valve so that the solution wets the surface but does not flood surface. Pass the scrubber over the floor in a manner that does not re-apply the solution onto previously scrubbed areas. Drop but do not lock the vacuum squeegee and turn vacuum on. Use red or white buffing pad. Periodic intensive cleaning with SCS HURRICANE will remove any build up that may accrue with repeated use.
NOTE: De-foaming agents are not necessary when scrubbing with PATINA™. COVERAGE: 30,000 to 40,000 sq. ft. ( 2,787 - 3,716 sq. meters) per gallon.
Features & Benefits
- Low foaming
- Use on a wide variety of stone surfaces
- No rinse required
- Improves slip resistance
No Video Available
DANGER: CAUSES SKIN IRRITATION. CAUSES SERIOUS EYE DAMAGE. KEEP OUT OF THE REACH OF CHILDREN
Prevention: Wash thoroughly after handling. Wear protective gloves. Wear eye/face protection.
Response: If on skin: Wash with plenty of water. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse.
Storage: Store away from incompatible materials.
Disposal: Dispose of waste and residues in accordance with local authority requirements.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.