ONE ®

Labor Saving Sealer / Finish

  • Description

    ONE ® represents a true advance in floor finish performance. This super high solids formula produces unmatched “off-the-mop” gloss with extended gloss retention. Utilizing exclusive Advanced Polymer Technology, this superior floor coating will produce maximum gloss with fewer coats than conventional floor finishes. Combination sealer / finish saves product costs. Exceptional response to UHS burnishing.

    Authorized UL Product


    Key Market Information

    Code: 0590
    Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case
  • Specifications

    • TypePure acrylic polymers
    • pH8.5
    • Coverage (sq. ft./gal)3,000
    • Drying Time (minutes)30
    • ColorWhite
    • OdorAcrylic
    • Film AppearanceClear
    • PowderingNone
    • Flash PointNot available
    • Slip ResistantYes
    • Shelf Life1 year minimum in original unopened container
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet One TDS English GHS.pdf Safety Data Sheet ONE SDS English.pdf Secondary Label One (Undiluted) GHS Secondary Label 6 up.pdf Product Flyers, Brochures, and Equipment Manuals World Class Floor Care Brochure
  • Directions

    Floor Preparation:  Using BARE BONES®, No-rinse, No-scrub Liquifying Stripper, strip off old finish and wax following product label directions. For baseboards and corners, use a preferred NCL Baseboard Stripper.  Make sure the floor is clean and dry before applying finish.
    Application: Using a clean mop or applicator apply a thin uniform coat of ONE.  Allow to dry for a minimum of 30 minutes after each coat.  Do not apply more than 4 coats in a 24 hour period.
    High Speed Buffing and Burnishing: This is an ideal product for use with high speed polishing or burnishing machines of 1500- 3000 rpm (electric, battery or propane). Dust mop using a preferred NCL Dust Mop Treatment prior to high speed buffing or burnishing. Buff or dry burnish using an aggressive natural hair burnishing pad.  For spray buffing, mop-on restoration or auto scrubbing use SPIT-SHINE™ Ultra High Speed Kleen & Burnish.
    Maintenance: Dust mopping daily using mop treated with a preferred NCL Dust Mop Treatment.  Use a recommended NCL neutral floor cleaner for routine cleaning.  Spray buffing to remove embedded soils is recommended using SPIT-SHINE Kleen & Burnish.  Worn  areas, or the entire floor, may be scrubbed and recoated as required to maintain a uniform high gloss.

  • Features & Benefits

    • Applicable for use in high traffic areas
    • Achieves maximum versatility
    • MPS77 Advanced Polymer Technology produces exceptional gloss from fewer coats
    • Sealer/finish combination for product cost savings
    • Maximum resistance to scratches and scuffs
  • Video

  • Safety

    KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Observe good industrial hygiene practices.
    Response: Wash thoroughly after handling.
    Storage: Store away from incompatible materials.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
    This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products