MATTE

Satin Gloss Floor Finish

  • Description

    An easy-to-maintain, durable floor coating that produces a satin gloss appearance. Ideal for use in assisted living / nursing centers, especially those that focus on Alzheimer's patients. Perfect for linoleum and other flooring where a high gloss appearance is not desired. Resistant to scuffing, scratching and black heel marks.


    Key Market Information

    Code: 0585
    Packaging: 4 x 1 Gal./Case
  • Specifications

    • TypeMetal Bonded Integrated Polymer
    • Coverage (sq. ft./gal)2500 - 3000
    • Drying Time (minutes)30
    • OdorAcrylic
    • ColorWhite
    • pH8.2
    • PowderingNil
    • Film AppearanceClear
    • Non-yellowingYes
    • Flash PointNot available
    • NonslipYes
    • Freeze thaw stableYes
    • Detergent ResistantYes
    • DurabilitySuperior
    • Soil ResistanceSuperior
    • Scuff ResistanceSuperior
    • Black Mark ResistanceSuperior
    • LevelingExcellent
    • RecoatabilityExcellent
    • RemovabilityExcellent
    • Shelf Life1 year minimum in original unopened container
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Matte Satin Gloss Floor Finish TDS English GHS.pdf Safety Data Sheet MATTE FINISH SDS English.pdf Miscellaneous Documents MATTE SATIN GLOSS FLOOR FINISH Brochure.pdf
  • Directions

    Floor Preparation: Strip old finish and wax using your preferred NCL floor stripper following label directions. For baseboards and corners, use an NCL baseboard stripper following label directions. If necessary, rinse thoroughly with clean water and allow to completely dry.

    Application: Using a clean mop or applicator apply thin uniform coats of MATTE™ Satin Gloss Floor Finish. Allow to dry for a minimum of 20 minutes after each coat. Do not apply more than 4 coats in a 24 hour period. Floor should be thoroughly dry before traffic is allowed in area.

    Routine Maintenance: Dust mop using mop treated with an NCL dust mop treatment. Damp mop or clean with an automatic scrubber using your preferred NCL neutral floor cleaner following label directions.

    Interim Maintenance: MATTE™ Satin Gloss Floor Finish is not recommended for burnishing. Scrubbing and Recoating is recommended. Dilute QWIK-SCRUB™ Scrub and Recoat Cleaner in mop bucket according to label dilution directions. Liberally mop solution onto floor surface and allow to dwell for 1 to 4 minutes. Fill autoscrubber with clear water, mount scrubbing pad or medium grade brush. With vacuum off and squeegee up, scrub the floor until all embedded soils and scuffs are removed from finish. Lower squeegee and vacuum to remove all scrubbing solution. Using clear water from the autoscrubber, rinse floor to remove any excess

  • Features & Benefits

    • Low gloss appearance / Recommended for assisted living, nursing centers, especially those focusing on Alzheimer's patients.
    • Extremely durable finish / Reduces maintenance and wears exceptionally well.
    • Self sealing / Does not require the use of a separate sealer.
    • Designed for ease of application / May be applied by any personnel without extensive training
  • Video

  • Safety

    KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Observe good industrial hygiene practices.
    Response: Wash thoroughly after handling.
    Storage: Store away from incompatible materials.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
    This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products