BALANCE™

UHS Sealer / Finish

• Description
• Directions
• Features & Benefits
• Specifications
• Safety
• Documentation
• Video

• Description

  BALANCE™ UHS Sealer/Finish offers perfect symmetry of wet-look gloss, durability, soil resistance and superior response to UHS Burnishing. Formulated with exclusive HPS™ Structure Technology, this high solids formula provides “best-in-class” performance with ultimate ease of application. Ideal for high traffic areas in schools, lobbies & supermarkets to maximize your facility’s image.

  Authorized UL Product

  ---

  Key Market Information

  Code: 0573
  Packaging: 55 Gal. Drum; 5 gal. Pail; 4 x 1 Gal./Case

• Specifications

  • TypeHPS™ Hybrid Polywax
  • pH8.1
  • Drying Time (minutes)30
  • Specific Gravity (g/cc)1.03 ± 0.01
  • ColorWhite
  • OdorAcrylic
  • PowderingNone
  • Flash PointNot available
  • Slip ResistantYes
  • Shelf Life2 years minimum in original unopened container

• Disinfectant Efficacy

• Documentation

  Technical Data Sheet Balance TDS English GHS.pdf Safety Data Sheet BALANCE SDS English.pdf Secondary Label Balance (Undiluted) GHS Secondary Label 6 up.pdf Product Flyers, Brochures, and Equipment Manuals Balance Brochure.pdf Product Flyers, Brochures, and Equipment Manuals World Class Floor Care Brochure

• Directions

  Floor Preparation: Strip old finish and wax using BARE BONES or appropriate NCL stripper following label directions. For baseboards and corners, use Baseboard Stripper following label directions. If necessary, rinse thoroughly with clean water and allow to completely dry. 
  Application: Using a clean mop or applicator apply a thin uniform coats of BALANCE™. Allow to dry for a minimum of 30 minutes after each coat. Do not apply more than 4 coats in a 24 hour period. Floor should be thoroughly dry before traffic is allowed in area.
  Buffing and Burnishing: BALANCE™ is ideal for use in burnishing programs with equipment 1000 RPM or higher.  Prior to burnishing, dust mop the floor surface using dust mop treatment. Burnish using an appropriate burnishing pad. For ultimate gloss restoration, use POP & SHINE Gloss Restorer.
  Routine Maintenance: Dust mop using mop treated with CONTROL Dust Mop Treatment. Damp mop or clean with an automatic scrubber using ENHANCE or appropriate NCL neutral floor cleaner following label directions. 
  Scrub and Recoat: When routine maintenance and buffing/burnishing no longer responds as needed, scrub and recoat using QWIK-SCRUB Scrub and Recoat Cleaner following label directions.

• Features & Benefits

  • Unmatched Wet-Look Gloss.
  • Exceptional Durability
  • Superior Soil Resistance
  • Extraordinary response to UHS

• Video

• Safety

  KEEP OUT OF THE REACH OF CHILDREN
  Precautionary statement:
  Prevention: Observe good industrial hygiene practices. Response: Wash thoroughly after handling.
  Storage: Store away from incompatible materials.
  Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
  This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
  Additional safety measures:
  Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products